The Oil & Gas Coolants are designed to extend the life of both high and low RPM natural gas compression engines, natural gas secondary heaters, and other equipment used in and around gas transmission and power generation.
Diglycolamine is a colorless, slightly viscous liquid with a mild amine odor. DGA is miscible with water, alcohols, and aromatic hydrocarbons, but relatively immiscible with aliphatic hydrocarbons and ethyl ether.
Diglycolamine is used in water treatments, gas refining, preparation of foam stabilizers, wetting and emulsifying agents, condensation polymers, photoresist strippers, and amides for personal care and metalworking applications.
Dow Ambitrol CN is an inhibited ethylene glycol-based concentrate coolant for use in low RPM (less that 750 RPM) gas compression engines. Ambitrol CN should be diluted with distilled (or deionized) water to concentrations ranging from 30-60% by volume, depending upon the degree of freeze protection desired.
Dow Ambitrol FL 30 is a 30% inhibited ethylene glycol coolant that contains a non-nitrite inhibitor package for low RPM compression engines (less that 750RPM). Ambitrol FL 30 is a completely formulated and prediluted coolant with ethylene glycol, deionized water, and a complete inhibitor system. AMBITROL FL 30 coolant is desirable when high quality dilution water is unavailable or when the convenience and accuracy of a prediluted product is desired.
Dow Ambitrol FL 40 is a 40% inhibited ethylene glycol coolant that contains a non-nitrite inhibitor package for low RPM compression engines (less that 750RPM). Ambitrol FL 40 is a completely formulated and prediluted coolant with ethylene glycol, deionized water, and a complete inhibitor system. AMBITROL FL 40 coolant is desirable when high quality dilution water is unavailable or when the convenience and accuracy of a prediluted product is desired.
Dow Ambitrol FL 50 is a 50% inhibited ethylene glycol coolant that contains a non-nitrite inhibitor package for low RPM compression engines (less that 750RPM). Ambitrol FL 50 is a completely formulated and prediluted coolant with ethylene glycol, deionized water, and a complete inhibitor system. AMBITROL FL 50 coolant is desirable when high quality dilution water is unavailable or when the convenience and accuracy of a prediluted product is desired.
Dow Ambitrol NTC is an inhibited propylene glycol-based concentrate coolant for use in low RPM (less than 750) gas compression engines. Ambitrol NTC is miscible and chemically compatible with Ambitrol CN coolant. Before installation, it should be diluted to a concentration between 30% and 60% by volume to obtain the appropriate level of freeze and corrosion protection.
Dow Ambitrol NTF 30 is a 30% inhibited propylene glycol coolant that contains a non-nitrite inhibitor package for low RPM compression engines (less that 750RPM). Ambitrol NTF 30 is a completely formulated and pre-diluted coolant with propylene glycol, deionized water, and a complete inhibitor system. Ambitrol NTF 30 coolant is desirable when high quality dilution water is unavailable or when the convenience and accuracy of a pre-diluted product is desired.
Dow Ambitrol NTF 40 is a 40% inhibited propylene glycol coolant that contains a non-nitrite inhibitor package for low RPM compression engines (less that 750RPM). Ambitrol NTF 40 is a completely formulated and pre-diluted coolant with propylene glycol, deionized water, and a complete inhibitor system. Ambitrol NTF 40 coolant is desirable when high quality dilution water is unavailable or when the convenience and accuracy of a pre-diluted product is desired.
Dow Ambitrol NTF 50 is a 50% inhibited propylene glycol coolant that contains a non-nitrite inhibitor package for low RPM compression engines (less that 750RPM). Ambitrol NTF 50 is a completely formulated and pre-diluted coolant with propylene glycol, deionized water, and a complete inhibitor system. Ambitrol NTF 50 coolant is desirable when high quality dilution water is unavailable or when the convenience and accuracy of a pre-diluted product is desired.
NORKOOL Desitherm Desiccant is used to remove water from natural gas. Equipped for use in extreme temperatures, this process can result in the formation of organic acids, such as glycolic, formic and acetic acids, in a process known as glycol degradation. When pH reaches an unstable level it can cause pure TEG to become corrosive. NORKOOL Desitherm is designed to withstand higher temperatures, prevent degradation of products and help systems to stay in the safe zone.
Dow Norkool LTC 30 is a 30% inhibited propylene glycol coolant that contains a nitrite inhibitor package for high RPM compression engines (greater than 750 RPM). Norkool LTC 30 is a completely formulated and pre-diluted coolant with propylene glycol, deionized water, and a complete inhibitor system. Norkool LTC 30 coolant is desirable when high quality dilution water is unavailable or when the convenience and accuracy of a pre-diluted product is desired.
Dow Norkool LTC 40 is a 40% inhibited propylene glycol coolant that contains a nitrite inhibitor package for high RPM compression engines (greater than 750 RPM). Norkool LTC 40 is a completely formulated and pre-diluted coolant with propylene glycol, deionized water, and a complete inhibitor system. Norkool LTC 40 coolant is desirable when high quality dilution water is unavailable or when the convenience and accuracy of a pre-diluted product is desired.
Dow Norkool LTC 50 is a 50% inhibited propylene glycol coolant that contains a nitrite inhibitor package for high RPM compression engines (greater than 750RPM). Norkool LTC 50 is a completely formulated and pre-diluted coolant with propylene glycol, deionized water, and a complete inhibitor system. Norkool LTC 50 coolant is desirable when high quality dilution water is unavailable or when the convenience and accuracy of a pre-diluted product is desired.
Dow Norkool LTC is an inhibited propylene glycol-based concentrate coolant for use in high RPM (greater than 750 RPM) gas compression engines. Norkool LTC is miscible and chemically compatible with Norkool SLH coolant. Before installation, it should be diluted to a concentration between 30% and 60% by volume to obtain the appropriate level of freeze and corrosion protection.
Dow Norkool SLH 30 is a 30% inhibited ethylene glycol coolant that contains a nitrite inhibitor package for high RPM compression engines (greater than 750 RPM). Norkool SLH 30 is a completely formulated and pre-diluted coolant with propylene glycol, deionized water, and a complete inhibitor system. Norkool SLH 30 coolant is desirable when high quality dilution water is unavailable or when the convenience and accuracy of a pre-diluted product is desired.
Dow Norkool SLH 40 is a 40% inhibited ethylene glycol coolant that contains a nitrite inhibitor package for high RPM compression engines (greater than 750 RPM). Norkool SLH 40 is a completely formulated and pre-diluted coolant with propylene glycol, deionized water, and a complete inhibitor system. Norkool SLH 40 coolant is desirable when high quality dilution water is unavailable or when the convenience and accuracy of a pre-diluted product is desired.
Dow Norkool SLH 50 is a 50% inhibited ethylene glycol coolant that contains a nitrite inhibitor package for high RPM compression engines (greater than 750 RPM). Norkool SLH 50 is a completely formulated and pre-diluted coolant with propylene glycol, deionized water, and a complete inhibitor system. Norkool SLH 50 coolant is desirable when high quality dilution water is unavailable or when the convenience and accuracy of a pre-diluted product is desired.
Dow Norkool SLH is an inhibited ethylene glycol-based concentrate coolant for use in high RPM (greater than 750 RPM) gas compression engines. Before installation, it should be diluted to a concentration between 30% and 60% by volume to obtain the appropriate level of freeze and corrosion protection.
