Chemical Distribution

Sulfuric Acid 93% is available in many sizes including: bulk, 330 Gallon tote, 275 Gallon totes, and 55 Gallon drums.

Nitric Acid treatment is also use in Agricultural applications to dissolve precipitates of lime (calcium carbonate) and calcium residue from fertilizer applied under high pH conditions in the irrigation system.

Dow Ambitrol CN is an inhibited ethylene glycol-based concentrate coolant for use in low RPM (less that 750 RPM) gas compression engines. Ambitrol CN should be diluted with distilled (or deionized) water to concentrations ranging from 30-60% by volume, depending upon the degree of freeze protection desired.

Dow Ambitrol FL 40 is a 40% inhibited ethylene glycol coolant that contains a non-nitrite inhibitor package for low RPM compression engines (less that 750RPM). Ambitrol FL 40 is a completely formulated and prediluted coolant with ethylene glycol, deionized water, and a complete inhibitor system. AMBITROL FL 40 coolant is desirable when high quality dilution water is unavailable or when the convenience and accuracy of a prediluted product is desired.

Dow Ambitrol NTC is an inhibited propylene glycol-based concentrate coolant for use in low RPM (less than 750) gas compression engines. Ambitrol NTC is miscible and chemically compatible with Ambitrol CN coolant. Before installation, it should be diluted to a concentration between 30% and 60% by volume to obtain the appropriate level of freeze and corrosion protection.

Dow Ambitrol NTF 40 is a 40% inhibited propylene glycol coolant that contains a non-nitrite inhibitor package for low RPM compression engines (less that 750RPM). Ambitrol NTF 40 is a completely formulated and pre-diluted coolant with propylene glycol, deionized water, and a complete inhibitor system. Ambitrol NTF 40 coolant is desirable when high quality dilution water is unavailable or when the convenience and accuracy of a pre-diluted product is desired.

Dow Norkool Cleaner is designed for use during flush of your heat transfer system in order to properly remove contaminants from the system prior to introduction of new fluid. A proper flush of your system will prevent fouling and premature degradation of your valuable heat transfer fluids as well as your assets.

NORKOOL Desitherm Desiccant is used to remove water from natural gas. Equipped for use in extreme temperatures, this process can result in the formation of organic acids, such as glycolic, formic and acetic acids, in a process known as glycol degradation. When pH reaches an unstable level it can cause pure TEG to become corrosive. NORKOOL Desitherm is designed to withstand higher temperatures, prevent degradation of products and help systems to stay in the safe zone.

Dow Norkool HTF Iron Inhibitor is a phosphate & azole based re-inhibitor that is utilized to elevate the protection of iron and other ferrous metals in your heat transfer system.

Dow Norkool Inhibitor 231 is a phosphate, azole, and nitrite based re-inhibitor that is utilized to elevate the protection of iron and other ferrous metals in your heat transfer system.

Dow Norkool Inhibitor 244 is a nitrite based re-inhibitor that is utilized to replace nitrites that have degraded in your heat transfer system. Often, Inhibitor 244 will be used in conjucntion with Norkool HTF pH Booster to stabilize the pH in your system prior to further nitrite addition.

Dow Norkool LTC 40 is a 40% inhibited propylene glycol coolant that contains a nitrite inhibitor package for high RPM compression engines (greater than 750 RPM). Norkool LTC 40 is a completely formulated and pre-diluted coolant with propylene glycol, deionized water, and a complete inhibitor system. Norkool LTC 40 coolant is desirable when high quality dilution water is unavailable or when the convenience and accuracy of a pre-diluted product is desired.

Dow Norkool LTC is an inhibited propylene glycol-based concentrate coolant for use in high RPM (greater than 750 RPM) gas compression engines. Norkool LTC is miscible and chemically compatible with Norkool SLH coolant. Before installation, it should be diluted to a concentration between 30% and 60% by volume to obtain the appropriate level of freeze and corrosion protection.

Dow Norkool SLH 40 is a 40% inhibited ethylene glycol coolant that contains a nitrite inhibitor package for high RPM compression engines (greater than 750 RPM). Norkool SLH 40 is a completely formulated and pre-diluted coolant with propylene glycol, deionized water, and a complete inhibitor system. Norkool SLH 40 coolant is desirable when high quality dilution water is unavailable or when the convenience and accuracy of a pre-diluted product is desired.

Dow Norkool SLH is an inhibited ethylene glycol-based concentrate coolant for use in high RPM (greater than 750 RPM) gas compression engines. Before installation, it should be diluted to a concentration between 30% and 60% by volume to obtain the appropriate level of freeze and corrosion protection.

Fluorosilicic Acid, NSF, 23-25%, CAS 16961-83-4, is used in a wide variety of chemical intermediate applications where need for metal salts of fluorosilicic acid are desired.

Fluorotitanic Acid 50%, CAS 17439-11-1, (also known as hydrogen fluorotitanate, hexafluorotitanic acid) has the chemical formula H₂TiF₆.  Fluorotitanic acid is used in industrial applications including metal surface treatment and flux as well as electroplating, chrome-free aluminum anodizing, for the manufacture of potassium titanium fluoride, and in the preparation of catalysts.  In metal plating, Fluorotitanic acid is often used with Fluorozirconic Acid.

Formaldehyde 37.0% Tech Liq Available in 55 Gallon Drums

Heat Transfer Medium 25% Concentrate - can be diluted to your specifications for your system.

Hydrofluoric Acid, 70%, CAS 7664-39-3, (also known as Hydrogen Fluoride) has the chemical formula HF.  Hydrofluoric Acid is extremely hazardous and sale is restricted.  HF Acid is widely used as an intermediate in industrial chemical manufacturing, mining clarification, oil refining catalyst production, glass manufacture and finishing, and silicon chip manufacturing. It is also used in a number of chemical preparations for metal pickling, etching, and buffing and in ceramic and porcelain applications for restoration.  **Custom concentrations and blends of HF chemistry are available from Florida Chemical.

Dequest PB11625 is a Carboxymethyl inulin, sodium salt solution for use as a green alternative to traditional phosphonates. Dequest PB11625 is derived from Chickory root, so it is viable for use in formulas that require all naturally derived products.

Nitric acid is used for specialty applications, such as etching in printmaking, pickling stainless steel or cleaning silicon wafers in electronics. Florida Chemical offers custom compounds of Hydrofluoric and Nitric Acid Blends. Nitric Acid treatment is also use in Agricultural applications to dissolve precipitates of lime (calcium carbonate) and calcium residue from fertilizer applied under high pH conditions in the irrigation system.

Potassium Hydroxide 45% is available in many sizes including: Bulk, 330 Gallon tote, 275 Gallon totes, and 55 Gallon drums. We can also pump into your tank at your location.

Sodium Bisulfite, NSF Liquid is available in many sizes including: 330 Gallon tote, 275 Gallon totes, and 55 Gallon drums. We can also pump into your tank at your location.